Section B - 1
robert juliat
Route de Beaumont F 60530 Fresnoy-en-Thelle - phone: 33 (0)3.44.26.51.89 - fax: 33 (0)3.44.26.90.79 - www.robertjuliat.fr
Robert Juliat r
eserve the right to change or alter any of the items detailed on this page, to incr
ease or impr
ove manufacturing
techniques without prior notice.
TECHNICAL FILE
1200W HMI FOLLOW SPOTS
1149 & 1449 /
B, C & CB
Disconnect from the mains before any servicing.
Service only by qualified technician.
2
1
3
9°
7°
1
119
- Remove the colour frame from the slot 1 .
- For changing a colour, open the 4 clips 2 .
- Cut out a colour 3 : Ø 207.
CHANGING THE COLOUR FRAMES AND COLOURS.
1
4
5
7
8
6
4
3
2
MAINTENANCE
ASPHERIC LENS & REFLECTOR.
- Disconnect from the mains.
- Unscrew the four screws 1 and unplug the Earth
link 2 then remove the lamp house bonnet 3 .
- Unlock 4 and remove the aspheric holder 5
and the reflector
holder 6 .
- Clean the lenses 7 and the reflector 8 with a soft
dry cloth.
- Remount all in reverse order.
- Clean in the same way, the lenses
in the lens tube.
SPARK-GAP.
- Disconnect from the mains.
- Open the lamp house bonnet.
- Unscrew the nut a , while holding in place the
counter-nut b .
- Then, unscrew the counter-nut b .
- Adjust, with a 2,5 hexagon key, the upper electrode c to
1 mm from the electrode.
- Tighten the counter-nut b and the nut a .
• Gap adjustment is factory set.
Interfere only in case of a faulty starting.
1 mm
a
b
c
8
8
2,5
Summary of Contents for Lucy 1449
Page 2: ...ii NOTES...
