24
HP
- High Performance Engine for maximum light output and optimal colour characteristics.
HCF
- High Colour Fidelity Engine for the best light quality and colour reproduction.
The type of used LED engine is displayed if the fixture is disconnected from power as well.
The green icon at the top right corner of the screen indicates the level of the display battery charging. If the
whole icon is green, the battery is fully charged while the red icon indicates exhausted battery. The battery
charges during fixture operation, its charging lasts cca 6 hours.
We recommend that the fixture should be in operation at least 7 hours per week to keep the battery fully charged.
If you switch the fixture on and this screen will not appear till 1 minute, switch the fixture off and on again. If the
screen lights, the battery is exhausted. In case the screen still does not light, the battery is faulty.
This is also indicated by an error message "Faulty battery" and if such an error message appears the battery
should be replaced immediately. The lifetime of the battery is highly dependent on ambient temperature (and
consequently on base temperature). If the maximum ambient temperatures (as recorded and displayed in menu:
Information -> Fixture Temperatures -> Ambient Temperature -> Maximum NonRes.) are kept within the spec
-
ified limits, the battery should last for at least two years. Shell the ambient temperatures exceed the specified
maximum temperature, the lifetime of the batteries could be considerably shortened even up to just one year
or less and also result in physical damage (battery leakage) or unreliable fixture functions.
Damage caused by batteries failed due to exceeded maximum ambient temperature cannot be claimed under
warranty terms.
Press the [ENTER/Display On] button to display the initial screen with the current stored DMX address:
Press the [ENTER/Display On] button to enter the " Address" menu.
An item may be selected from a screen by pressing the [NEXT] or [PREV] buttons to scroll through list items.
With each press, the next item is highlighted. Press [ENTER] to select the highlighted item.
Before first fixture operation, set current date and time in the menu "Date &Time
Setings" (menu path: Personality--> Date &Time Setings).
Locking/unlocking the screen.
To lock the screen, display the screen with ROBE logo, touch the [ESCAPE] button and slide your finger clockwise
in a circular track of 360° across buttons [ESCAPE] --> [NEXT] --> [ENTER/Display On] -->[PREV]--> [ESCAPE].
The sign "Buttons are locked" will appear on the screen. If this sign will not appear, repeat finger sliding again
with a different speed.
