Robe ROBIN iBeam 250, User Manual

Page: 27 / 43

27
9. NFC
The fixture supports NFC. Using the mobile phone application ROBE COM you can read and set the Robin
iBeam 250 parameters (DMX address, IP address...etc.), get information about temperatures, operation hours,
RDM identification etc.
The NFC point is situated on the front panel of the fixture.
Download and install the ROBE COM from Google Play (for Android 5.0 and higher) or App Store (for iOS 12.0
and higher) to your mobile phone. Your mobile phone has to support NFC (Near-Field Communication).
Hold the mobile phone on the side of the fixture base, if NFC connection is OK, discovered fixture will appear
on the screen, after touching the fixture name the following the following menu items will appear:
DMX/RDM settings
Ethernet settings
Blackout settings
Colour settings
Display settings
Standalone settings
Pan/Tilt settings
Other settings
Software versions
Device hours
Device temperatures
Touch desired menu item to enter its submenu.
10. Error and information messages
Tilt Err
This message will appear after the reset of the fixture if the head´s indexing circuit malfunctions (sensor failed)
or the stepping motor or its driving PCB is defective. The head is not located in the default tilt position after
fixture reset.
Pan Err
This message will appear after the reset of the fixture if the head´s indexing circuit malfunctions (sensor failed)
or the stepping motor or its driving PCB is defective. The head is not located in the default pan position after
fixture reset.
Zoom Err
his message will appear after reset of the fixture if the zoom module is not located in the default position. Cause
of the message can be some defective zoom stepping motor.
Red Shrt
The message informs you that short circuit has occured in the red LEDs circuit on the LEDs PCB.