Robe ROBIN iBeam 250, User Manual

Page: 23 / 43

23
To edit program:
1. Touch [NEXT] or [PREVIOUS] button to select the menu "Edit" and touch [ENTER].
2. Touch [NEXT] or [PREVIOUS] button to select the desired program step and touch [ENTER] button.
3. Touch [NEXT] or [PREVIOUS] button to select the desired item and touch [ENTER] button. Now you can edit
DMX value (0-255) for selected item by touching [NEXT] or [PREVIOUS] buttons:
Prg End. a total number of the program steps (value 1-40). This value you should be set before
starting of programming (e.g. if you want to create program with the 10 steps,
set Prg End=10).
PAn a coarse pan movement
PAn F a fine pan movement
Tilt a coarse tilt movement
Tilt F a fine tilt movement
P/T Sp a pan/tilt speed
Powr power/special functions
Virt C a virtual colour wheel
Red a red colour coarse
Red F a red colour fine
Green a green colour coarse
Green F a green colour fine
Blue a blue colour coarse
Blue F a blue colour fine
White a white colour
White F a white colour fine
CTC a colour temperature correction
C Mix C a colour mix control
Zoom a zoom function
Zoom F a zoom function fine
Stro a strobe/shutter function
Dimm a dimmer function coarse
Dim F a dimmer function fine
F.Tim a fade time (0-25.5 sec)
S.Tim a step time (0-25.5 sec)
COPY copying the current prog. step to
the next prog. step
4. Press [ENTER] button to confirm adjusted value .
5. Press [ESCAPE] button, select next prog. step, press [ENTER] button and repeat steps 3 - 5).
7.7 Reset
This option enables the ROBIN iBeam 250 to index all effects and return to their standard positions.
7.8 Special (Special functions)
RDM Low - t he menu item shows the first part of the RDM identification code .
RDM High - t he menu item shows the second part of the RDM identification code.
Wireless (Wireless DMX information) - t he menu allows you to read some information about
Wireless DMX operation
Stat (Wireless status) - Use the menu to read wireless DMX status.
Unlink - use this item to unlink fixture from wireless DMX transmitter .
Adjust (Adjustment) - the menu allows you fine adjustment of effects.
DMX Val. (DMX values) - use the menu to set DMX values of fixture´s channels.
Calib (Calibration) - calibration of effects.
Cal. Mech. (Calibration of Mechanical parts ) - use this menu to calibrate pan/tilt/zoom
positions.
Cal. Col. (Calibration of Colours) - the menu serves for calibration of colours in the factory.
User should not change settings in this menu.