Robe ROBIN BMFL LightMaster Rear User Manual Download Page 25

Page: 25 / 25

Rear version

Included items

1 x Robin BMFL LightMaster (side or rear)

1 x BMFL Base adaptor for FollowSpot (P/N 10980365)

1 x Tripod for RoboSpot, FollowSpot, LightMaster (P/N 10980350)

1 x USB cable A-B, 1.8m length (P/N13050756)

1 x User manual

8. Cleaning and maintenance

A soft lint-free cloth moistened with suitable cleaning fluid is recommended, under no circumstances should

solvents be used!

More complicated maintenance and service operations are only to be carried out by authorized distributors.

8.1 Disposing of the product

To preserve the environment please dispose or recycle this product at the end of its life according to the local
regulations and codes.

Specifications are subject to change without notice.

December 6, 2018

Made in CZECH REPUBLIC by ROBE LIGHTING s.r.o. Palackeho 416/20 CZ 75701 Valasske Mezirici

Summary of Contents for ROBIN BMFL LightMaster Rear


























Search results

Summary of Contents for ROBIN BMFL LightMaster Rear

Reviews:

Related manuals for ROBIN BMFL LightMaster Rear

Brands by name

Popular brands

Robe ROBIN BMFL LightMaster Rear, User Manual

Search results

Summary of Contents for ROBIN BMFL LightMaster Rear

Reviews:

Related manuals for ROBIN BMFL LightMaster Rear

Brands by name

Popular brands