Robe ROBIN BMFL LightMaster Rear User Manual Download Page 3

Page: 3 / 25

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY

BEFORE YOU INSTALL THE PRODUCT

1. Safety instructions

CAUTION!

The ROBIN BMFL LightMaster was designed for indoor use only.

The product is for professional use only, it is not for household use.

This product has left our premises in absolutely perfect condition. In order to maintain this condition and to

ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warnings

written in this manual.

The manufacturer will not accept liability for any resulting damages caused by the non-observance of this

manual or any unauthorized modification to the product.

If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on

immediately. The arising condensation water might damage your device. Leave the device switched off until

it has reached room temperature.

Refer servicing to qualified service personnel.

Operate the ROBIN BMFL LightMaster only after having familiarized with its functions. Do not permit operation

by persons not qualified for operating the ROBIN BMFL LightMaster. Most damages are the result of unpro-

fessional operation!

Please use the original packaging if the ROBIN BMFL LightMaster is to be transported.

Please consider that unauthorized modifications on the fixture are forbidden due to safety reasons!

Summary of Contents for ROBIN BMFL LightMaster Rear


























Search results

Summary of Contents for ROBIN BMFL LightMaster Rear

Reviews:

Related manuals for ROBIN BMFL LightMaster Rear

Brands by name

Popular brands

Robe ROBIN BMFL LightMaster Rear, User Manual

Search results

Summary of Contents for ROBIN BMFL LightMaster Rear

Reviews:

Related manuals for ROBIN BMFL LightMaster Rear

Brands by name

Popular brands