23
Faders Switch
- s
waps functions of faders.
Password Settings
-
the menu item allows you to change the password or switch it on/off at entry the
FollowSpot Controller menu
.
Change password
- use this option to change password. Default (factory) password is 5242.
Protect with Password
- If this function is on, the password is required at entry the FollowSpot
Controller menu.
Note: both menu items stated above require inserting of password to enter them even the password is
set off ! You have to remember last set password!
In case you have forgotten your password, use the master password 4678.
Recalibrate Touchscreen
-
The item starts calibration of the touchscreen. Follow instructions on
the screen.
Default Settings
- The menu item allows you to set the items stated above (except Ethernet Settings) to default
values.
Note: the password will not be set to a default password (set password will remain without change) but the
option "Protect with Password will be set to On".
6. Software update
The FollowSpot Controller software update is done via a network connection between a computer running a
ROBE RDM Uploader software through the RJ45 input of the FollowSpot Controller base. It is important to
note, that the FollowSpot Controller IPv4 address has to be set to 2.x.x.x network (for example 2.0.1.10) with
netmask 255.0.0.0 . During the update, the FollowSpot Controller has to be attached to FollowSpot Controller
base and this base has to be connected to the BMFL fixture by means of the USB cable. The BMFL fixture has
to be connected to mains.
To update software in the FollowSpot Controller.
1. Connect a computer running ROBE RDM Uploader to the internet and update software libraries (Libraries
→ Update)
2. Connect the computer and the FollowSpot Controller base via Ethernet cable.
3. Set computer to address 2.x.x.x/255.0.0.0. Do not change any IP settings on the FollowSpot Controller.
4. Use the ROBE Uploader → Devices → Discovery and Devices → Update. This will update the FollowSpot
Controller.
Summary of Contents for ROBIN BMFL LightMaster Rear
Page 1: ...Version 1 7 ...
