30
Iris
- an iris
Strobe 1/1
- a strobe lamella 1 position 1
Strobe 1/2
- a strobe lamella 1 position 2
Strobe 2/1
- a strobe lamella 2 position 1
Strobe 2/2
- a strobe lamella 2 position 2
Dimmer 1/1
- a dimmer lamella 1 position 1
Dimmer 1/2
- a dimmer lamella 1 position 2
Dimmer 2/1
- a dimmer lamella 2 position 1
Dimmer 2/1
- a dimmer lamella 2 position 2
Diffusor
- auxiliary optic element
By using these items you can calibrate and adjust effects to their right positions.
Calibration via the control board
1. Disconnect DMX controller from the fixture and enter the "Calibrate Effects" menu.
2. Use the [up arrow] and [down arrow] to find desired effect and touch it to enter the fine effect adjustment
screen.
3. Set desired value and save it by touching the [confirm].
4. Repeat steps 2 and 3 for the next effects.
5. After calibrating all effects, touch the [confirm] to save all adjusted values and reset the fixture.
Calibration via the DMX controller
1. Connect DMX controller to the fixture and set fixture effects to the desired positions before fine calibration.
2. Enter the "Calibrate Effects" menu and now you can exactly calibrate desired effects by DMX controller.
A calibration protocol:
Effect
Mode 1
Mode 2
Pan
channel
49
channel
42
Tilt
channel
50
channel
43
Colour Wheel 1
channel 51
channel 44
Colour Wheel 2
channel 52
channel 45
Cyan
channel
53
channel
46
Magenta channel
54
channel
47
Yellow
channel
55
channel
48
CTO
channel
56
channel
49
Zoom
channel
65
channel
58
Light Frost
channel 66
channel 59
Medium Frost
channel 67
channel 60
Heavy Frost
channel 68
channel 61
Focus 1
channel 69
channel 62
Focus 2
channel 70
channel 63
Iris
channel
71
channel
64
Strobe 1/1
channel 72
channel 65
Strobe 1/2
channel 73
channel 66
Strobe 2/1
channel 74
channel 67
Strobe 2/2
channel 75
channel 68
Dimmer 1/1
channel 76
channel 69
Dimmer 1/2
channel 77
channel 70
Dimmer 2/1
channel 78
channel 71
Dimmer 2/1
channel 79
channel 72
Diffusor
channel 80
channel 73
After having calibrated all effects, touch the [confirm] to save adjusted values and reset the fixture.
Load Default Calibrations
- The item loads default (factory) calibration values.
Calibrate Pan/Tilt EMS
- This menu item allows calibration of the pan/tilt
electronic motion stabilizer.
Important: during this calibration any external force must not influence the fixture and the surface at which
the fixture stands (or truss if the fixture hangs) has to be without movement, shake, strokes etc.
Updating software
-
The menu item allows you to update software in the fixture via either serial or USB port
of PC.
The following items are required in order to update software:
Summary of Contents for Robin BMFL FollowSpot
Page 1: ...1 Version 1 5 ...
Page 40: ...40 Photometric diagrams Min zoom ...
Page 41: ...41 Max zoom ...
