Robe Robin BMFL FollowSpot, User Manual

Page: 26 / 52

26
Dimmer 1 Error Magenta Error
Dimmer 2 Error Yellow Error
Colour Error CTO Error
Focus Error Clean Air Filters
Zoom Error Iris Error
Active Lamp Timer Temp. Sensor Error
Lamp Error Base Overheated
Fixture States - Recorded following actions: Fixture On, Fixture Off, Lamp On, Lamp Off.
Fixture Position - Recorded installation positions of the fixture:
Fixture Temperatures - Recorded temperatures which have exceeded defined levels.
Note: The log buffer can contain 8000 records max. If the buffer is full, old data will be overwritten.
7.3 Tab "Personality"
User mode - The Robin BMFL FollowSpot allows you to recall two user settings. After switching the fixture on
for the first time, the User A settings is active. Now all changes made in the “Personality” menu , ”Addressing”
menu and the “Music Trigger“ and “ Preset Playback“ items from the “Stand-alone” menu are saved to the
User A settings. If you now select the User B settings, from this moment the changes made in these menus will
be saved to the User B settings. After switching the fixture off and on, the User B setting is active.
User A Settings - the function recalls the user A settings.
User B Settings - the function recalls the user B settings.
DMX Preset - Use the menu to select desired channel mode.
Mode 1 - 33 control channels
Mode 2 - 27 control channels
View Selected Preset - Use the menu to display channels included in the selected mode.
DMX Input - Use the menu to select mode of DMX signal receiving.
Wired - DMX signal is received by means of the standard DMX cable.
Wireless - DMX signal is received by means of the inbuilt wireless module.
Wireless In/XLR Out - the fixture receives wireless DMX and sends the signal to its wired DMX output.
The fixture behaves as " Wireless/Wired" adapter.
The options "Wired" and "Wireless" are also stated in DMX chart (channel Power/Special functions).
Note. If the wireless module is not installed in the fixture, the following message will appear:
DMX Input Set to Wired
Wireless Module Missing
If the fixture is not connected to mains, the message "Not Available In Offline Mode" will appear after entering
the menu DMX Input. To enter this menu, the fixture has to be connected to mains.
Pan/Tilt Settings - Use the menu set behaviour of both pan and tilt movements.
Pan Reverse - The item allows to invert pan movement.
Tilt Reverse - The item allows to invert tilt movement.
Pan/Tilt Feedback - The item allows to return the moving head to the required pan/tilt position after
changing the position by an external force if this option is set on.
Note. Be careful, the Pan/Tilt Feedback should be permanent On, the option Off is not suitable for standard
operation and the head of the fixture can be damaged!
Pan/Tilt mode - Use this menu to set the mode of the pan/tilt movement