Robe Robin 300E Spot User Manual Download Page 30

Page: 30 / 39

Gobo rotation Error 1 (Gobo Rotation Error 2 )

The messages will appear after the reset of the rotating gobo wheel if the rotating gobos are not located in the

default positions.

Static Gobo Error 1 (Static Gobo Wheel Error 2 )

The messages will appear after the reset of the static gobo wheel if this wheel is not located in the default

position.

Clean Air Filters

The message informs that the item "Elapsed Time" in the "Fixture Information" menu is at 0 value. Clean air

filters and reset this counter.

11. Technical Specifications

Electrical:

Power supply:.........................electronic auto-ranging

Input voltage range:............... supply 100-240V, 50/60Hz

Live Fuse:...............................T 8 A@230V, T 15 A@120V

Neutral Fuse:..........................T 8 A@230V,T 15A@120V

Power consumption:.........770 VA at 230V (750W, power factor 0.976)

*Allow for a deviation of +/-10%

Lamp:

Approved model: MSR Gold 575/2 MiniFastFit (37000 Lm, 7500K, 750 hrs lamp life)

Base:PGJX 28

Ballast:

Electronic

Optical System:

High luminous-efficiency glass reflector

zoom range: 10°-45°

Colour wheel:

7 replaceable 'SLOT&LOCK' dichroic filters (including UV filter)

CMY + CTO mixing module

Smooth CMY colour mixing system

Colour temperature correction filter lowers the colour temperature to 3200 K

30 colour macros

Static gobo wheel:

9 replaceable ‘SLOT&LOCK’ gobos (8 metal gobos, outside diameter=26.9mm, image

diameter=22.5mm, aluminium, thickness=0.5 mm; one glass gobo, high temperature boro

float)

Gobo wheel continuous rotation

Rotating gobo wheel:

7 glass gobos can be indexed and rotated in both directions at different speeds

Gobo wheel continuous rotation

Glass gobos: outside diameter=26.8 mm, max. thickness=4 mm, high temperature borofloat or

better glass

"Slot&lock" system for easy replacement of gobos

Prism:

Rotating 3-facet 11° prism with continuous rotation in both directions

Iris:

Motorized iris for different beam diameters

Summary of Contents for Robin 300E Spot








































Search results

Summary of Contents for Robin 300E Spot

Reviews:

Related manuals for Robin 300E Spot

Brands by name

Popular brands

Robe Robin 300E Spot, User Manual

Search results

Summary of Contents for Robin 300E Spot

Reviews:

Related manuals for Robin 300E Spot

Brands by name

Popular brands