Software Version
- Select this item to read the software version of the fixture modules:
Display System
- A display processor on the display board in the fixture base
Module M
- A pan/Tilt processor on the main board in the fixture arm
Module S
- A strobe/colour/hot-spot processor on the board in the fixture head.
Module I
- A rot. gobo/stat. gobo/iris processor on the board in the fixture head.
Module O
- A focus/zoom/prism/frost/ processor on the board in the fixture head.
Module C
- CMY+CTO processor on the board in the fixture head.
Product IDs -
The menu is used to read the MAC Address ,RDM UID and RDM Label.
View Logs
- Use this menu to read fixture´s data which have been recorded during fixture operation. This
colected data allows easier troubleshooting.
Fixture Errors
- Use this menu to read fixture errors which have occured during fixture operation.
There is a list of error folders:
Pan Errors
Prism Errors
Tilt Errors
Prism Rotation Errors
Dimmer Errors
Frost Errors
Dimmer 2 Errors
Cyan Errors
Colour Errors
Magenta Errors
HotSpot Errors
Yellow Errors
Gobo Errors
CTO Errors
Gobo Carousel Errors
Clean Air Filters
Static Gobo Errors
Lamp is Too Hot
Iris Errors
Overheated
Focus Errors
Active Lamp Timer
Zoom Errors
Lamp Errors
Temp. Sensor Errors
Fixture States
- Recorded following actions: Fixture On, Fixture Off, Lamp On, Lamp Off.
Fixture Position
- Recorded installation positions of the fixture:
Fixture Temperatures
- Recorded temperatures which have exceeded defined levels.
Note: The log buffer can contain 8000 records max. If the buffer is full, old data will be overwritten.
7.3 Tab "Personality"
User mode
- The Robin 600ESpot allows you to recall up to 3 user settings. After switching the fixture on for
the first time, the User A settings is active. Now all changes made in the “Personality” menu , ”Addressing”
menu and the “Music Trigger“ and “ Preset Playback“ items from the “Stand-alone” menu are saved to the
User A settings. If you now select the User B settings, from this moment the changes made in these menus will
be saved to the User B settings. After switching the fixture off and on, the User B setting is active. In this way
you may use the 3 fixture operating behaviours.
User A Settings
- the function recalls the user A settings.
User B Settings
- the function recalls the user B settings.
User C Settings
- the function recalls the user C settings.
DMX Preset
- Use the menu to select desired channel mode.
Mode 1
- 3 control channels
Mode 2
- 5 control channels
Mode 3
- 3 control channels
View Selected Preset
- Use the menu to display channels included in the selected mode.
Summary of Contents for Robin 300E Spot
