LiteWare HO2
5
2. Fixture exterior view
3. Installation
3.1 Switching the LiteWare HO2 on
Press and hold the ON/OFF button for 3 seconds and the first screen will appear.
This screen blinks on a rota basic with the following screen which displayes battery capacity.
If DMX address flashes , the LiteWare does not receive DMX signal.
The LiteWare HO2 is equipped with 2-row LCD display which allows to set the fixture´s behaviour according to
your needs, obtain information on its operation, test its various parts and lastly program it, if it has to be used in a
stand-alone mode.
The six control buttons on the control panel have the following functions:
ESCAPE
button-leaves menu without saving changes.
ENTER
button- enters menu, confirms adjusted values and leaves menu.
Top side
1. Control buttons
2. Display
3. On/Off button
4. Unlink button
5. Lenses
6. Handle
Bottom side
7. Charging input
8. Rubber feets
Battery capacity 19%
WF signal level Symbol of linking to DMX transmitter
Selected DMX mode
DMX address
Discharging
