LiteWare HO2
4
Do not short battery positive terminal to case as this will cause irreparable damage of the unit.
Only connect the unit to the „Robe” charging system!
Before transportation of the LiteWare units in the charging case or keeping them for a longer time in the
charging case which is not connected to mains , switch the LiteWare units off.
Do not block the front LEDs with any object when the unit is under operation.
Only use a battery specified in the chapter „Technical specifications“. We can not guarantee changer compatibillity
with other batteries.
If the unit has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on
immediately. The arising condensation water might damage your device. Leave the device switched off until it has
reached room temperature.
Please consider that unauthorized modifications on the unit are forbidden due to safety reasons!
If used outside, the unit must be dried after use and before inserting into charging case.
