Robe Digital Spot 7000 DT User Manual Download | Manualshive

Page: 6 / 141

background image

DigitalSpot 7000 DT

6

When choosing the installation spot, please make sure that the device is not exposed to extreme heat, moisture or
dust.

Air vents and slots in the fixture´s head and base are provided for ventilation, to ensure reliable operation of the
device and to protect it from overheating.

The openings should never be covered with cloth or other materials, and never must be blocked.

This fixture should not be placed in a built-in installation unless proper ventilation is provided.

Always use a secondary safety cable when mounting this fixture.

Only operate the fixture after having checked that the housing is firmly closed and all screws are tightly fastened.

Make sure that the area below the installation place is blocked when rigging, derigging or servicing the fixture.

Do not block the front objective lens with any object when the fixture is under operation.

The lamp becomes extremely hot during operation. Allow the fixture to cool approximately 40 minutes prior to
removing the lamp assembly for replacement. Do not operate lamps beyond the rated lamp life.

Operate the fixture only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the fixture. Most damages are the result of unprofessional operation!

Please use the original packaging if the fixture is to be transported.

Please consider that unauthorized modifications on the fixture are forbidden due to safety reasons!

If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, lamp explosion, crash etc.

To switch the DigitalSpot 7000 DT off, always use either option "Fixture Off" in main menu or set a DMX value of

channel 8 between 240-249.

Never switch the fixture off by pulling out the power plug from the socket otherwise the fixture may be damaged

(projector lamp, operating system...)!

2. Unpacking

The DigitalSpot 7000 DT is packaged in either a cardboard box or one-unit (two-unit) flight case to protect the
product during shipment.
The following items are included:

- the DigitalSpot 7000 DT

- 2 omega holders

- the USB 2.0 flash drive with a System recovery utility

- this user manual

«
...
4
5
6
7
8
...
»

Summary of Contents for Digital Spot 7000 DT














































































































































Reviews:

No comments

Related manuals for Digital Spot 7000 DT

Crouse-Hinds FMV Series

Brand: Eaton Pages: 3

Brand: Magnaflux Pages: 36

Brand: nedis Pages: 22

Brand: EuroLite Pages: 12

Brand: tempLED Pages: 10

Brand: KIIROO Pages: 15

Brand: Squareled Pages: 15

Brand: EuroLite Pages: 16

Walther GL2000r

Brand: Umarex Pages: 2

Brand: Hubbell Pages: 4

Brand: Intermatic Pages: 2

Brand: Satco Pages: 2

Brand: GARO Pages: 8

Brand: Chauvet Pages: 14

Brand: e-conolight Pages: 2

Brand: MicroFire Pages: 3

Brand: Cooper Lighting Pages: 2

Brand: Sealey Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands