DigitalSpot 7000 DT
34
After shaping the image by means of the parameters stated above, you can apply the global banner effects on the
whole graphics output and this final image should appear for instance like this:
17. In Frame and Out Frame parameters
You can select any segment of a video file for playback by assigning parameters for In Frame (start point) and an
Out Frame (end point) as pictured below.
The In Frame parameter corresponds to a 16-bit DMX value equal to a starting point for the playback segment of
the selected video file. The Out Frame parameter corresponds to a 16-bit DMX value equal to an end point for the
playback segment of the selected video file.
1
.Assigning the In Frame DMX values to 0
and Out Frame DMX values to 255 you will
playback the entire video file.
2
.
You can create a segment anywhere
between the beginning and the end of the
video file
.
