6
4. Installation
4.1Fitting the lamp
DANGER !
Install the lamps with the device switched off only.
Unplug from mains before !
To insert the lamp MSR 575W/2 loosen the lamp cover at the rear of head (see the drawings ) by remowing the 3
fastening screws which are marked
"X,Y,Z"
.Carefully pull out the cover with the lamp socket assembly.If changing
the lamp, remove the old lamp from the socket. Insert the lamp to the socket.
Do not install a lamp with a higher wattage! A lamp like this generates temperatures the device is not de-
signed for.Damages caused by non-observance are not subject to warranty. Please follow the lamp
manufacturer‘s notes!Do not touch the glass-bulb with bare hands during the installation! Make sure that the
lamp is installed tightly into the lampholder system.
Reclose the lamp cover and tighten the 3 screws.
Before striking the lamp, reset the
"Lamp On Time"
and
"Lamp Strikes"
counters in
"Fixture information"
menu of the control board.
Do not operate this fixture with opened housing-cover!
3 fastening screws "X,Y,Z"
Lamp cover
Lamp cover
Summary of Contents for ColorSpot 575E AT
Page 1: ...1 Version 1 4 ...
Page 36: ...36 ...
