31
Program 3
--- The option will start created program No. 3
Note:
If the fixture operates in the controller mode ( DMX controller is connected) and any program from this menu
is selected ,in this case the fixture will not respond to the DMX controller after switching on and will play selected
program.
Playing program
--- Select this menu to run a bilt-in program or the 3 freely-programmable programs
in a loop.
Test Program In Loop
--- The option starts built-in test program.
Program 1 In Loop
--- The option starts created program No. 1
Program 2
In Loop --- The option starts created program No. 2
Program 3 In Loop
--- The option starts created program No. 3
Select the program you wish and press [ENTER].The selected program starts running.By Pressing [ENTER]
again is possible to pause the program running.
Editing Program
--- Select this menu to edit or create the program.The ColorSpot 575E AT has one built-in
program and the 3 free programs,each up to 99 steps.Each program step has a step time.
Step time-the time,during which effects last in the current step.
Procedure:
1. Select the program you want to edit ("Program 1" - "Program 3") and press [ENTER].
2. Select "Edit Steps" menu and press [ENTER].
3. Select the desired program step ("Step 01" - "Step 99") and press [ENTER].
4 Select the desired item and press [ENTER].Now you can edit DMX value for selected item:
"Pan"
- a coarse pan,value 0-255
"Pan Fine"
- a fine pan,value 0-255
"Tilt"
- a coarse tilt,value 0-255
"Tilt Fine"
- a fine tilt,value 0-255
"Pan/Tilt Speed "
- a speed of pan/tilt movement,value 0-255
"Spec. Func."
- a special functions, lamp on/off,reset,value 0-255
"Pan/Tilt Macro"
- a pan/tilt macro,value 0-255
"P./T.Macro Speed"
- a pan/tilt macro speed,value 0-255
"Colour Wheel 1"
- a colour wheel 1,value 0-255
"Colour 1 Fine"
- a colour wheel 1-fine positioning,value 0-255
"Colour Wheel 2"
- a colour wheel 2,value 0-255
"Colour 2 Fine"
- a colour wheel 2-fine positioning,value 0-255
"Static Gobo Wheel " -
a static gobo wheel ,value 0-255
"Static Gobo Fine" -
a fine positioning,value 0-255
"Rot. Gobo Wheel " -
a rotating gobo wheel ,value 0-255
"Rot.Gobo Indexing" -
a rot.gobo - coarse indexing and rotation,value 0-255
"Rot.Gobo F.Indexing " -
a rot.gobo -fine indexing ,value 0-255
"Prism " -
a prism and prism/gobo macros,value 0-255
"Prism Rotation" -
a prism rotatation,value 0-255
"Frost" -
a frost,value 0-255
"Frost Fine" -
a fine frost movement,value 0-255
"Iris" -
an iris,value 0-255
"Iris Fine" -
a fine iris movement,value 0-255
"Zoom" -
a zoom,value 0-255
"Focus" -
a focus,value 0-255
"Focus Fine" -
a fine focus movevent,value 0-255
"Shutter/Strobe" -
a shutter and strobe,value 0-255
"Dimmer" -
a dimmer intensity-coarse ,value 0-255
"Dimmer Fine" -
a dimmer intensity-fine,value 0-255
5. Select "Save" or "Save and Copy" and press [Enter] to confirm adjusted values:
"Save" -
saving the current prog. step
"Save and Copy" -
saving and copying the current prog. step to the next prog. step .
6. Go on next prog. step and repeat this procedure (steps 4 and 5).
After creation the program,you can simply reduced its length (by changing the start/end steps) using the "Start
Step" and "End Step" menu.
9.8 Reset functions
The ColorSpot 575E AT can be reset totally or by function modules.Select relevant function to run a reset:
Reset All
--- This function enables the fixture to index all effects and return to their standard positions.
Summary of Contents for ColorSpot 575E AT
Page 1: ...1 Version 1 4 ...
Page 36: ...36 ...
