CityLine 48
16
6.3 Personality
Use this menu to modify the CityLine 48 operating behaviour.
dM.Pr.
---
DMX preset
. Select this menu item to set a desired DMX mode. Please refer to the chapter "DMX
protocol" for detail description of each DMX mode.
Note: Selected DMX preset affects number of items in the menu”dM.In” and ”MAn.M”.
dM.In.
---
DMX input
. Select this menu item to select desired DMX input:
dM.Ur.
--- Wire DMX.
dM.UL.
--- Wireless DMX
DiSP.
---
Display adjusting
. This function allows you to change the display settings.
d.On
--- this function allows you to keep the display on or to turn off automatically 2 minutes
after last pressing any button on the control panel.
d.Int.
--- select this function to adjust the display intensity (30-min.,100-max.).
turn
--- select this function to turn the display by 180°.
dotS.
---
Pixels configuration
. The function allows you to set configuration of pixels.
FInd
--- this function checks all pixels and the message “donE” is displayed after the procedure.
Sort
--- this function allows to assign to each pixel its desired position (DMX address) in the LED
modules.
After entering “Sort”, item “dt.I” ( dot 1) will appear. Press Enter and the position of dot 1 will start flashing. Use
Up/Down buttons to select desired pixel position (“dP.1” – “dP.12”). Pixel position influences its DMX address-see
pictures in examples below. Repeat the procedure for pixels 2-12. After setting positions for all pixels, select
“Stor.” to save current pixel sorting.
Note: If message “nonE” appears in the menu “Sort”, run “ Find” function again.
Example 1 –
Default (factory) pixel ordering
- pixels are sorted inline
Position of flashing pixels “dt1-dt12” depends on ID of each pixel and can be different for different fixtures.
Summary of Contents for CityLine 48
Page 1: ...Version 1 4 ...
Page 26: ...CityLine 48 26 ...
