CityLine 48
17
Example 2
Example 3
If two or more pixels have the same pixel position (“dP.1-d.P12”) they will have the same DMX address.
Only DMX channels 1-12 are used for control this pixel configuration. If all pixels have the same pixel position, the
fixture will behave as one pixel.
Upd.
--- Pixels update
. Besides the main control electronics in the fixture base every pixel
contains its own control driver. After standard software updating of the control electronics via the menu “SPEC”,
the pixels update has to be performed if some software changes are required in the pixel drivers.
In.Po.
---
Init effect positions.
Use this function to set all effects to the desired positions to which they will move
after switching the fixture on (if DMX is not being received).
C.C.Mo.
---
Colour calibration mode.
If the functin is on, the white output from the fixture (and also mixed colours) is
more uniform. Each colour is dynamically corrected according to the value set in the menu "C.CAL" (SPEC-> C.CAL).
dF.SE.
---
Default Settings .
The menu item sets all fixture parameters to the default (factory) values.
6.4 Manual mode
Use this menu for control the fixture without DMX console.
Note: The number of items depends on the selected DMX mode in the menu “dM.Pr” (PerS—>dM.Pr.)
Summary of Contents for CityLine 48
Page 1: ...Version 1 4 ...
Page 26: ...CityLine 48 26 ...
