3
1. Introduction
The SubDrive 4 serves for power and control up to four ArcSource Submersible II LED modules.
2. Safety information
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
BEFORE POWERING OR INSTALLING YOUR SUBDRIVE 4 !
Save it for future reference.
DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT!
The fixture was designed for outdoor use and it is intended for professional application only. It is not for house
-
hold use.
Make sure that the available voltage is not higher than stated on the fixture.
Be careful when removing fixture cover in order to get access to the control display and the fixture is under
voltage. If you do not need to set the fixture, always disconnect the fixture from AC power before removing its
cover.
Do not install the fixture near an open flame.
Refer servicing to qualified service personnel.
This fixture falls under protection class I. Therefore this fixture has to be connected to a mains socket outlet
with a protective earthing connection.
Do not connect this fixture to a dimmer pack.
Keep combustible materials at least 10 cm away from the fixture.
Do not cover the fixture with cloth or other materials.
When choosing the installation spot, please make sure that the fixture is not exposed to extreme heat or dust.
Only operate the fixture after having checked that the housing is firmly closed and all screws are tightly fastened.
Operate the fixture only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the fixture.
Please consider that unauthorized modifications on the fixture are forbidden due to safety reasons!
Please use the original packaging if the fixture is to be transported.
If this device will be operated in any way different to the one described in this manual, the product may suf
-
fer damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like
short-circuit, burns, electric shock etc.
Immunity of the equipment is designed for electromagnetic environments E1, E2, E3 according to
the standard EN55103-2 ed.2 Electromagnetic compatibility. Product family standard for audio, video,
audiovisual and entertainment lighting control apparatus for professional use. Part 2: Immunity.
The installation company should check levels of possible interferences above the tested levels E1,E2,E3 given
by this standard (e.g. transmitters in surrounding area) before installing the equipment.
The product (covers and cables) must not be exposed to a high frequency electromagnetic field higher than 3V/m.
Emission of the equipment complies with the standard EN55032 Electromagnetic compatibility of multimedia
equipment – Emission Requirements according to class B.
Summary of Contents for ANOLIS Subdrive 4
Page 1: ...1 Version 1 4 ...
Page 7: ...7 RB 3091 ...
