11
"Edit" --- Editing program.
The fixture offers 3 freely editable programs (PrG.1-Prog.3) each up to 42 steps.
Every program step includes a fade time-the time taken by the step´s channel status to reach the desired level
and a step time-the total time occupied by the step in the program.
E.g. If fade time=5 second and step time =20 second, effects will go to the desired position during 5 seconds
and after that they will stay in this position for 15 seconds before going to the next prog. step
1. Use the UP/DOWN buttons to find “ St.AL“ menu and press the ENTER button.
2. Use the UP/DOWN buttons to select “Edit“ menu and press the ENTER button.
3. Use the UP/DOWN buttons to select a program you want to edit (PrG.1-PrG.3) and press ENTER button.
4. Use the UP/DOWN buttons to select a desired program step ("St.1" - "St. 42") and press ENTER button.
5. Use the UP/DOWN buttons to select a channel you want to edit and press the ENTER button.
List of editable items:
“P.End” - a total number of program steps (value 1-42). This value should be set before start
programming (e.g. if you want to create program with 10 steps, set P.End=10).
“rEd1” - a red LEDs saturation on output 1
“GrE.1“ - a green LEDs saturation on output 1
“bLu.1“ - a blue LEDs saturation on output 1
“Vhi.1“ - a white LEDs saturation on output 1
"AMb.1" - an amber LEDs saturation on output 1
:
“rEd4” - a red LEDs saturation on output 4
“GrE.4“ - a green LEDs saturation on output 4
“bLu.4“ - a blue LEDs saturation on output 4
“Vhi.4“ - a white LEDs saturation on output 4
"AMb.4" - an amber LEDs saturation on output 4
“CtO“ - a colour temperature correction (for all outputs)
“V.C.Vh“ - a virtual colour wheel (for all outputs)
“Stro“- a strobe, shutter (for all outputs)
“dinn“- a dimmer (for all outputs)
“din.F” a fine dimmer (for all outputs)
“F.tiM.“- a fade time, (0-25.5) seconds
“S.tiM.“ - step time, value (0-25.5) seconds
“CoPy“. – this item duplicates the current prog. step to the next prog. step. The item “P.End” is
increased automatically if you stay in a last program step.
6. Use the UP/DOWN buttons to set a DMX value of the channel and then press the ENTER button.
7. Use the UP/DOWN buttons to select next channel and press the ENTER button.
8. After having set all channels in the current program step, press the ESCAPE button to go by one menu level
back and select another program step.
5.7 Special functions ("SPEC")
"rdML" --- RDM Code
. This menu item shows the first part of the RDM identification code.
"rdMH" --- RDM Code
. This menu item shows the second part of the RDM identification code.
"L. tyP." --- LED colour variant
. This menu allows to set desired colour variant according to connected LED
module.
"rGbV" – RGBW variant.
"Si. Co."– Single colour variant.
"SM.Wh.– Smart white variant.
"rGbA" - RGBA variant.
Note: some menu items will be changed according to set colour variant!
uPd.b.
--- Software update. The menu item allows you to update software in the Control unit and connected
ArcSource Submersible IIs via either serial or USB port of PC.
The following items are required in order to update software:
- PC running Windows or Linux or macOS
- DSU file
- Flash cable RS232/DMX, P/N13050624 (if you want to use a serial port of PC)
- Robe Universal Interface or Robe Universal interface WTX (if you want to use an USB port of PC)
After the software update the fixture will be set to default values.
Summary of Contents for ANOLIS Subdrive 4
Page 1: ...1 Version 1 4 ...
Page 7: ...7 RB 3091 ...
