ENGLISH
8
Instructions and User Manual
E L E VATO R
20
ARF
PNP
Expert tip: The root ribs of the two wing parts have cutouts for MPX plugs. With a little work, you can
install the servo or socket cable of the respective wing half using the MPX connector.
If the adhesive tape is not sufficient, you can easily install smaller surface connectors in the root ribs. (no
MPX Multilock´s - these are too strong for this)
21
ARF
First place two spacer rings on the main connector,
then pass both through the openings in the fusela-
ge and lever. Then put again two of the rings on the
connector, then the second half of the elevator. The
fixing is done by two adhesive magnets already glued
in. If necessary, the clearance must be adjusted with
additional spacers.
First insert the main connector with the magnet into
the elevator rudder half where the counter magnet is
already mounted and attach two spacer rings. Then
thread the connectors through the openings in the
fuselage and the lever and attach two rings again.
Now glue the second half of the elevator in the large
opening and put it on the carbon connectors. After the
glue has hardened, you can simply remove the elevator
by separating the magnets.
ARF
PNP
