16
Appendix A
Hardware Components
Standard Node (120V – 277V)
This is installed on the top of a fixture into a NEMA receptacle. One will be
required for each fixture to be monitored and/or controlled by ROAMview.
Its function is to send collected information to the ROAMview Server and
to respond to on/off commands issued by the ROAMview Server.
347V
and 480V models are also available.
%FDPSBUJWF6UJMJUZ/PEF 7o7
This performs the same function as the Standard Node, but is designed
to fit into decorative style fixtures that have a NEMA locking receptacle.
%JNNJOH$POUSPM/PEF 7o7
To allow for dimming control, fixtures must be equipped with a 0-10V
input control interface, plus a ROAM dimming control module (DCM)
– both are supplied by the fixture manufacturer.
Summary of Contents for RoamView
Page 1: ...ROAMview Setup Guide ...
Page 19: ......
