10
Location Recommendations
The Gateway should be mounted outdoors and centrally located within the node deployment. The gateway
should not exceed 1,000 feet line-of-sight to the closest nodes; however, less than 500 feet to the closest nodes
is preferable.
Mounting
The Gateway may be mounted using a pole or directly to a suitable flat surface. In either case, the Gateway must
be mounted where the screw-on antenna points up and the indicator LED points down.
Pole Mounting
Use the supplied universal mount, articulating bracket and hardware to
attach to pole or pipe. The diameter of the pole or pipe must be between
1 and 3 inches.
Surface Mounting
Remove pole/pipe bracket coupling from the universal mount and secure
the arm directly to the surface using four ¼ inch bolts.
Gateway Installation
Summary of Contents for RoamView
Page 1: ...ROAMview Setup Guide ...
Page 19: ......
