28
Step 5:
Insert all the screws and tighten them as required in the table above. Always use the appropriate tooling (Pozidriv point
size:1) and do not over tighten.
WARNING!
Do not apply power to the power supply before replacing the lid and securing all the screws.
Never remove the cover secured on the input side of the chassis. It is sealed by a tamper evident security label.
Removing it makes accessible high voltage parts exposing a operator to electric shock danger. Any alteration affecting the
label will void the warranty on the Power Supply.
Step 6:
Reconnect the AC line input and apply power to ensure all the output modules are working by checking their LED light comes
on. Always check the output voltage of each module to ensure it is adjusted to your requirements. Remove power and connect
all other cables. The power supply is now ready for use.
