Sleeping Facilities
23
© 2016 by Erwin Hymer Group North America, Inc.
Twin Beds
You create two twin beds by lowering the sofa. The sofa makes a continuous sleeping surface with the two bench seats,
leaving the center aisle to make it easy to get in and out of bed.
King Bed
Support board for full bed
Once the sofa has been lowered fully, complete the following
steps to make the king bed.
• Locate the panel under the bench cushions on the passenger
’
s
side, and slide it out into the open space between the two side
bench seats. Secure it into the notches on the inner surface of
both bench seat bases.
•
• Reposition the bottom cushions of the side bench seats over
this panel so they are side by side.
•
• Place the long thin vertical bench seat cushions in the empty
space between the wall and the larger bench seat cushions.
When you raise the sofa put the seat belts back in
position. To do this, open the back door of the vehicle and
push the seatbelts through the sofa between the seat and
back cushions. NEVER use the rear seats for passengers
without seatbelts.
