HOWTO: Water System Winterizing
120
© 2016 by Erwin Hymer Group North America, Inc.
City water valve (shown closed)
•
• Open the sliding side door, remove the wood panel, and open
the city water valve. Turn this valve so that the black plastic
handle is pointed in the same direction as the water line.
•
• Allow air to enter the system by opening the galley faucet and
the hot and cold bathroom sink faucets. This will drain the
lines from these faucets to the water pump.
•
• Press and hold the hot and cold handles on the instant hot
water dispenser until no more water comes out.
•
• Close the city water valve by turning it 90 degrees so that the
black plastic handle is across the water line.
•
• Close the galley sink and bathroom sink faucets.
•
• Close the fresh water tanks drain under the passenger side
front door running board (black handle should be
perpendicular to water line).
