HOWTO: Cable and TV Reception
114
© 2015 by Roadtrek, Inc.
HOWTO: Cable and TV Reception
Your Roadtrek comes with a home theatre system. This consists of a TV, a DVD player, the speaker system and the radio in
the dash, along with a rooftop TV antenna and a cable TV connection.
The TV and home theatre system are located in the rear on the passenger side. The Cable TV/Antenna switch and power
injector for the built-in antenna are in the cabinet just above the DVD player.
The TV and the home theatre system must be on to use the system. Both the television and the DVD player use 120 volt
current, so the inverter, generator, or shore power must be used. Refer to the Electrical System for instructions on 120 volt
AC power.
The TV and DVD are supplied with remote controls.
The home theatre system has inputs for media devices. Read the Owner's manual for full details.
TV Bracket release
DVD player
The TV is stowed against the wall on a hinged bracket. The bracket is secured with a large thumbscrew. Turn the thumbscrew
horizontally to release the bracket and vertically to secure the bracket to the wall.
Once released, you can swing the TV to a comfortable viewing position.
Always stow the TV with the bracket secured to the wall for travel.
