To dump the exterior black waste water tank:
1.
Connect the dump fitting (stored in the storage compartment behind the large access door) to the
end of the assembly.
2.
Securely place the dump fitting and assembly in the local waste receptacle.
3.
Pull the black water gate valve handle (to open) to dump the tank contents.
To dump the grey waste water tank:
1.
Follow the same procedure using the grey water gate valve handle located in front of the sewage
discharge assembly.
2.
Be sure to dump the grey waste water tank last so as to help flush out any solid waste in the
sewage hose from the black waste water tank.
3.
Once the tank is empty, close the gate valve, remove the fitting, return the assembly to its support
structure and ensure that all caps and supports are securely in place.
4.
If desired, flush both waste tanks after dumping.
CAUTION: WHEN FINISHED DUMPING THE BLACK AND GREY TANKS AND THE ASSEMBLY IS
TILTED BACK TO ITS STORAGE POSITION. WRAP THE SUPPORT SPRING AROUND THE STEEL
SUPPORT BRACKET TO PREVENT THE ASSEMBLY FROM FALLING WHILE DRIVING, see Picture
G-P9.
Home & Park Motorhomes makes no warranty what so ever for damage caused to the sewage discharge
assembly as a result of this.
Waste Water Tank Flushing
:
To flush the waste water tanks:
1.
Ensure that both tanks are empty (see above).
2.
Fill the black waste water tank by inserting a hose into the toilet and the grey waste water tank
using the sink.
3.
Dump both tanks using the procedure outlined above.
Both waste water tanks can be flushed using a similar procedure, but rather than filling each tank using the
potable water system, they can be filled by inserting a hose directly into the sink and toilet.
WATER SYSTEMS
Page G.6
Printed in Canada
Copyright
Hanmar Motor Corporation 2001
Doc No:
FMSA0002
Rev:
01
