FRONT LOUNGE SEATS:
To convert the lounge seat into a single bed:
1.
Be sure all armrests are in an upright position. Swivel the passenger captain’s seat 270 degrees
clockwise so that the backrest is toward the center aisle, see Picture B-P15.
2.
Slide out the drawer under the passenger seat and fully extend the drawer forward until it touches
the raised platform, see Picture B-P16 . Raise the support block located at the front of the drawer,
see Picture B-P17.
3.
Lift the back rest cushion upward (on the lounge seat) remove it from its metal support and place it
flat on top of the drawer, with the tapered end forward, see Picture B-P18 .
To convert back to a lounge seat, perform these steps in reverse order.
Picture B-P15:
Swiveled front captain seat
Picture B-P16:
Extended drawer.
Picture B-P17:
Raised support.
Picture B-P18:
Front lounge bed
DAILY LIVING
Page B.7
Printed in Canada
Copyright
Hanmar Motor Corporation 2001
Doc No:
FMSA0002
Rev:
01