CAMERA SETTINGS
1. Install the disc and open
auto driver installation.exe
file to install the drivere.
2. Install
BodyWornCamera.exe.
onto your computer.
3. Connect the camera to the computer and run
BodyWornCamera.exe
a. Make sure the camera is not in recording mode or pre-recording mode prior
to connection to the computer
4. Once connected to the PC, the LCD will show
USB CONNECTING
and you can find
‘Discover device access’
in the bottom of
BodyWornCamera.exe software
after
the camera connects successfully. If unsuccessful, unplug the camera from the
USB while leaving the computer end in the computer, then try again. If this is
unsuccessful, speak with your IT personnel as it may be the workplace firewall
preventing access).
Page 6
