Before Connecting
Turn the VR500CS-BT ON, then turn your
cell phone’s Bluetooth Function ON.
1. Pairing
1. Press the “PHONE” button.
2. Press and hold the Volume Knob until
you see “DISP OFF”,
3. Press the Volume Knob repeatedly to
cycle through to “PAIRING”.
4. Press and hold the Volume Knob until the
word “PAIRING” blinks on the display,
5. Run the Bluetooth search and connect
function on your cell phone.
6. VR500CS-BT will be shown on your cell
phone’s list of available connections. Select
the VR500CS-BT to connect the cell phone
with the VR500CS-BT.
When you are asked for a connection pass-
word, please input
“0000”
in your cellphone
to finish the pairing.
The Bluetooth icon and the word “PHONE”
will be shown on the VR500CS-BT’s LCD
indicating that the Bluetooth function is ac-
tive and ready to use.
2. Ring Volume
1. Press the “PHONE” Button.
2. Press and hold the Volume Knob until
you see “FIND NUM”.
3. Then press the Volume Knob to cycle
through until “RING” appears. You can ad-
just the incoming call volume from “0”-”47”.
The radio will ring in the midst of song play-
ing if there is any incoming phone call.
3. Telephone Volume
1. Press the “PHONE” Button.
2. Press and hold the Volume Knob until
you see “FIND NUM”.
3. Then press the Volume Knob to cycle
through until “TEL” appears. You can adjust
the telephone volume from “0”-”47”. The
larger the number, the louder the speaker
volume during the call.
4. Incoming Call Display
When there is an incoming call the LCD Dis-
play will blink the incoming number for your
quick reference.
5. Answering a Call
When there is an incoming phone call, press
the GREEN PHONE Button on the front
panel or on the remote control to receive
the call through your car radio.
6. Ending a Call
When you have finished or wish to ignore a
call, press the Red “PHONE” Button either
on the Faceplate or on the remote control
to hang up.
7. Dialing with the Faceplate
When you want to dial a call from the front
panel of the radio, press the “PHONE” But-
ton on the front panel. Press Buttons 1-0 to
dial the telephone number you wish to call.
Press the Green PHONE Button to activate
the call.
8. Dialing on the Remote Control
To make a call dialing with the remote con-
trol, press the “PHONE” Button on the re-
mote. Press Buttons 1-0 on the remote to
dial the telephone number you wish to call.
Press the Green PHONE Button to activate
the call.
9. Recently Dialed Numbers
After connecting with cell phone;
1. Press the “PHONE” button.
2. Press and hold the Volume Knob until
you see “OUT NUM”.
3. Press and hold the Volume Knob and the
display will show the most recently dialed
number.
4. Rotate the Volume Knob to choose
among the 10 recently dialed numbers.
5. Press the Green “Phone” button to dial
the displayed number.
Alternative:
1. Press the “PHONE” button;
2. Press the Green Phone button;
3. The most recent dialled number will be
shown. Rotate the volume knob to view
the recent 10 dialed numbers. Press Green
Phone button to make call.
BLUETOOTH CONNECTION
12
Summary of Contents for VR500CS-BT
Page 1: ......
