1. RCA Output
The RCA Output Jacks are on the back of
the unit. (Refer to Wiring Diagram) This out-
put is for connecting an amplifier, equalizer,
or other audio componement that requires
a pre-amp out connection. (Red = Right,
White = Left) Follow the manufacturers in-
structions for the audio component that you
are connecting.
2. Sub Woofer Output
The Sub Woofer Output Jack is on the back
of the unit. (Refer to Wiring Diagram) This
output is for connecting an amplifier, that
requires a pre-amp out connection. (Red =
Right, White = Left)
To use the sub woofer Jack press SUB/#
Button on the front panel, or press the #/
SUB Button on the remote control to turn
the Sub Woofer Jack ON or OFF.
The unit must have an external amplifier in-
stalled to drive the subwoofer.
Follow the manufacturers instructions for
the audio component that you are connect-
ing.
3. Mic In
The Mic In jack on the rear of the unit is
for the supplied external microphone. The
external microphone is for the driver of the
vehicle.
ID3 TAG
If an MP3 file has ID3 Tag information, it will
be displayed on the LCD. If there is no ID3
Tag information, nothing will shown on LCD.
Press the BND/ID3 button anytime to view
the ID3 information of the song.
MAINTENANCE
Cleaning the Unit
Do not use any liquids to clean this unit.
Do not use petroleum distillates to clean
this unit.
Use a clean, dry cloth to clean this unit.
Replacing the Fuse
Make sure the amperage matches the spec-
ified value when replacing the fuse(s). If the
fuse is bad, check the power connection
and replace the fuse with a new one. If the
same problem occurs, this might indicate a
malfunction within the unit.
WARNING
When replacing a fuse, do not use a fuse
with a higher amperage rating than the fuse
originally supplied to your unit, otherwise
damage will result to your unit.
19
AUX IN, RCA OUT, MIC IN, & SUBWOOFER
Summary of Contents for VR500CS-BT
Page 1: ......
