9
Installation:
Caution
y
Be sure to stop the engine before installing the product.
y
Remove all power to any areas where wires will be connected.
y
Install the product in a location where the satellite signals are received.
y
Before permanently mounting the unit, ensure that the camera views
meet your requirements.
(ex: where the interior view is not hidden by
the mirror inside your car)
y
The Unit must be installed on the mounted straight both horizontally
and vertically
Installing the Unit
1.
Insert the holder into
the mounting
connection.
2.
Insert the IR light
module’s knob, on
the rare face of the
body.
3.
Clean the mounting
surface and remove
the red film from tape
the mount, and press in
place the mount to the
windshield tightly.
Caution
Connect power to the unit once the IR light module has been
connected.
Aim the IR light module towards the driver and passenger
area.
*Use isopropyl alcohol to clean the mounting surface of windshield, and leave it to dry.
