10
Connecting the power cord
1.
Connect the “Y” power
cable to the power
connection port on the
right side of the unit.
2.
Connect the other side
of “Y” power cable to
the power connection
port of the attached IR
light module of the unit.
3.
Arrange the power
cord neatly after
inserting it in the chink
of the door near the
driver or passenger
seat.
4.
Insert the power cord
into the Cigarette Lighter
Plug.
Installing the Remote External Alarm Button
1
.
Insert the Jack of the
manual alarm input
cable into the
connection port on the
upper part of the
Cigarette Lighter Plug.
Run the Cable, hiding
and securing it in place.
2.
Locate the best
position for the remote
alarm button. Secure
the button by removing
the adhesive film
attached to the tape
on the external button,
press and hold.
Note
The recorder will only record when there is power to the cigarette
lighter.
