RND 560-00160 — SOLDER STATION & FUME EXTRACTOR
Care & Maintenance Notice
Before use, always check the barrel locking nut is
handtightened to ensure the tip is firmly held in position.
Regularly remove the barrel and tip to keep it clean and clear of
debris. This should be done at least once a week.
The element is of ceramic composition which is sensitive to
sharp or strong impact. Do not drop it, or ‘tap’ the soldering
iron in an e fort to clean it. Cleaning should always be
performed with a damp sponge while the tip is hot.
FAILURE TO COMPLY WILL VOID WARRANTY
