RME Audio Hammerfall HDSPe MADI FX User Manual Download Page 9 | Manualshive

Page: 9 / 85

RME Audio Hammerfall HDSPe MADI FX User Manual Download Page 9

User's Guide HDSPe MADI FX

© RME

9

No warranty service is provided when the product is not returned to the local distributor in the
region where the product had been originally shipped.

Audio AG does not accept claims for damages of any kind, especially consequential damage.
Liability is limited to the value of the Hammerfall DSP. The general terms of business drawn up
by Audio AG apply at all times.

9. Appendix

RME news, driver updates and further product information are available on our website:

http://www.rme-audio.com

Distributor:
Audio AG, Am Pfanderling 60, D-85778 Haimhausen, Tel.: (49) 08133 / 918170

Manufacturer:
IMM Elektronik GmbH, Leipziger Strasse 32, D-09648 Mittweida

Trademarks

All trademarks, registered or otherwise, are the property of their respective owners. RME,
DIGICheck and Hammerfall are registered trademarks of RME Intelligent Audio Solutions.
HDSPe MADI FX, HDSPe MADI, HDSP AES-32, TMS, DIGI96, SyncAlign, ZLM, SyncCheck
and TotalMix are trademarks of RME Intelligent Audio Solutions. Alesis and ADAT are regis-
tered trademarks of Alesis Corp. ADAT optical is a trademark of Alesis Corp. Microsoft, Win-
dows 2000, Windows XP, Windows Vista and Windows 7 are registered trademarks or trade-
marks of Microsoft Corp. Steinberg, Cubase and VST are registered trademarks of Steinberg
Media Technologies GmbH. ASIO is a trademark of Steinberg Media Technologies GmbH.

Copyright

©

Matthias Carstens, 07/2013. Version 1.2

Current driver version: Windows: 1.13, Mac OS X Intel: 1.08. Firmware: 87, DSP 18

Although the contents of this User’s Guide have been thoroughly checked for errors, RME can not guarantee that it is
correct throughout. RME does not accept responsibility for any misleading or incorrect information within this guide.
Lending or copying any part of the guide or the RME Driver CD, or any commercial exploitation of these media without
express written permission from RME Intelligent Audio Solutions is prohibited. RME reserves the right to change specifi-
cations at any time without notice.

«
...
7
8
9
10
11
...
»

Summary of Contents for Hammerfall HDSPe MADI FX






















































































Reviews:

No comments