RME Audio Hammerfall HDSPe MADI FX, User Manual, Page: 51 / 85

User's Guide HDSPe MADI FX © RME 51
25.4 Section Control Room
In the section Control Room the menu
Assign
is used to define the
Main Out
which is used for
listening in the studio. For this output the functions Dim, Recall, Mono, Talkback, External In
and Mute FX are automatically applied.
Additionally the channel will be shifted from the Hardware Outputs into the Control Room sec-
tion, and renamed
Main
. The same happens when assigning Main Out B or the Phones. The
original name can be displayed by the function O-Names in the View Options at any time.
Phones 1 to 4 will have Dim (set in Settings) and a special routing applied when Talkback is
activated. Also putting them beside the Main Out increases the overview within the output sec-
tion greatly.
Dim.
The volume will be reduced by the amount set in the
Settings dialog (F3).
Recall.
Sets the gain value defined in the Settings dialog.
Speak. B.
Switches playback from Main Out to Main Out B.
The faders of the channels Main and Speaker B can be
ganged via Link.
Mono.
Mixes left and right channel. Useful to check for mono
compatibility and phase problems.
Talkback.
A click on this button will dim all signals on the
Phones
outputs by an amount set up in the Preferences
dialog. At the same time the control room's microphone signal
(source defined in Preferences) is sent to the
Phones
. The
microphone level is adjusted with the channel's input fader.
External Input.
Switches Main monitoring from the mix bus to the stereo input defined in the
Settings dialog (F3). The relative volume of the stereo signal is adjusted there as well.
Mute FX.
Mutes Reverb and Echo on the Main Out, to hear the mix without those effects.
Assign.
Allows to define the Main Out, Main
Out B (Speaker B), and up to four Phones
outs. The choice is limited to AES, Phones
and MADI 1 to 16, as the higher channels
are not available at 192 kHz.
The output for the Cue signal, which is
usually Main, can also be set to one of the
four Phones outputs.