RME Audio Hammerfall HDSPe MADI FX, User Manual

Page: 55 / 85

User's Guide HDSPe MADI FX © RME 55
Hidden channels in Mixer/Matrix are still fully functional. An existing routing/mixing/FX process-
ing stays active. But as the channel is no longer visible it can not be edited anymore. At the
same time the hidden channels are removed from the list of remote controllable channels, to
prevent them from being edited unnoticed.
Hidden channels in
MIDI Remote 1
are removed from the list of remote controllable channels.
Within an 8-channel block of a Mackie compatible control they are skipped. The control there-
fore is no longer bound to consecutive orders. For example it will control channels 1, 2, and 6
to 11, when channels 3 to 5 are hidden.
The same can be done for OSC. With unnecessary channels made invisible for the OSC re-
mote the more important channels are available as one block on the remote.
The dialog can be called
directly from TotalMix by
a right mouse click on
any channel. The cor-
responding channel will
then be preselected in
the dialog.
Rows Inputs, Playbacks
and Outputs are set up
individually by the tabs
at the top.
Active
indicates currently
available channels. At
higher sample rates
many MADI channels
are no longer active.
In
Use
shows which
channels are currently
used in the mixing
process.
In the above example the Phones playback channel has been made invisible. When the Phones
output is not used this is an easy way to remove it from the mixer completely. A more complex
setup would be to only show all channels of the drum section, the horn section or the violins.
After finishing those settings the whole state can be stored as
Layout Preset
.
A click on
Store
and the desired memory slot makes the current channel
layout recallable anytime. The button
All
makes all channels temporarily
visible again.
With a simple click on a button it will then be possible to easily switch views of
only the channels involved with the mixing of the drum section, the horn
section, the violins, or any other useful view. An optimized remote layout can
be activated here as well, with or without visible changes. Double-click the
default slot name to enter any other name.
Layout Presets are stored within the Workspace, so make sure to save the current state
before loading a different Workspace!
The button
Sub
activates another useful special view. When in
Submix view
, Sub will cause all
channels to disappear that are not part of the currently selected Submix/Hardware Output. Sub
temporarily shows the mix based on all channels from Inputs and Playback row, independent
from the current Layout Preset. That makes it very easy to see and to verify which channels are
mixed/routed to the current output. Sub makes checking and verifying of mixes, but also the mix
editing itself, a lot easier, and maintains perfect overview even with lots of channels.