manualshive.com logo in svg

RME Audio Hammerfall Digiface, User Manual, Page: 71 / 78

Share
Download
RME Audio Hammerfall Digiface User Manual Download Page 71

 

 

User's Guide HDSP System Digiface

 © RME

 

71 

 

32. Tech Info

 

 
Not all information to and around our products fit in a manual. Therefore RME offers a lot more 
and detailed information in the 

Tech Infos

. The very latest Tech Infos can be found on our 

website, section News & Infos, or the directory 

\rmeaudio.web\techinfo

 on the RME Driver 

CD. These are some of the currently available 

Tech Infos

: 

 
Synchronization II (DIGI96 series) 
Digital audio synchronization - technical background and pitfalls. 
 
Installation problems - Problem descriptions and solutions. 
 
Driver updates Hammerfall DSP – Lists all changes of the driver updates. 
 
DIGICheck: Analysis, tests and measurements with RME audio hardware 
A description of DIGICheck, including technical background information. 

 

ADI-8 Inside 
Technical information about the RME ADI-8 (24-bit AD/DA converter). 
 
Many background information on laptops and tests of notebooks: 
HDSP System: Notebook Basics - Notebook Hardware 
HDSP System: Notebook Basics - The Audio Notebook in Practice 
HDSP System: Notebook Basics - Background Knowledge and Tuning 
HDSP System: Notebook Tests - Compatibility and Performance 
 
The digital mixer of the Hammerfall DSP in theory and practise 
HDSP System: TotalMix - Hardware and Technology 
HDSP System: TotalMix - Software, features, operation 

Summary of Contents for Hammerfall Digiface















































































Reviews:

No comments