56
User's Guide HDSP System Digiface
© RME
Mouse:
The original factory presets can be reloaded by holding down the Ctrl-
key and clicking on any preset button. Alternatively the files described above
can be renamed, moved to a different directory, or being deleted.
Keyboard:
Using Ctrl and any number between 1 and 8 (not on the numeric
keypad!) will load the corresponding factory default preset. The key Alt will load
the user presets instead.
When loading a preset file, for example 'Main Monitor AN 1_2 plus headphone mix 3_4.mix',
the file name will be displayed in the title bar of the TotalMix window. Also when loading a pre-
set by the preset buttons, the name of the preset is displayed in the title bar. This way it is al-
ways clear what the current TotalMix state is based on.
The eight factory presets offer a pretty good base to modify them to your personal needs. In all
factory presets Submix View is active by default.
Preset 1
Description: All channels routed 1:1, monitoring of all playback channels via Phones.
Details: All inputs maximum attenuation. All playback channels 0 dB, routed to the same out-
put. All outputs 0 dB, Phones -6 dB. Submix of all playbacks to the analog Phones output.
Level display set to RMS +3 dB. View Submix active.
Note: This preset is
Default
, offering the standard functionality of a I/O-card.
Preset 2
Description: All channels routed 1:1, input and playback monitoring via Phones. As Preset 1,
plus submix of all inputs (0 dB) on Phones.
Preset 3
Description: All channels routed 1:1, input and playback monitoring via Phones and outputs. As
Preset 2, but all inputs set to 0 dB (1:1 pass through).
Preset 4
Description: All channels 1:1, playback monitoring via Phones and outputs. As Preset 3, but all
inputs muted.
Preset 5
Description: All faders m.a. As Preset 1, but all outputs maximum attenuation, only Phones
monitor of the playbacks is active.
Preset 6
Description: Submix on SPDIF at -6 dB. As Preset 1, plus submix of all playbacks on SPDIF.
Preset 7
Description: Submix on SPDIF at -6 dB. As Preset 6, but submix of all inputs and outputs on
SPDIF (SPDIF Monitoring).
Preset 8
Description: Panic. As Preset 4, but playback channels muted too (no output signal).
Preset Banks
Instead of a single preset, all eight presets can be stored and loaded at once. This is done via
Menu
File
,
Save All Presets as
and
Open All Presets
(file suffix .mpr). After the loading the
presets can be activated by the preset buttons. In case the presets have been renamed (see
chapter 28.11), these names will be stored and loaded too.
Summary of Contents for Hammerfall Digiface
