RME Audio DSP Multiface, User Manual

Page: 69 / 80

User's Guide HDSP System Multiface II
© RME
69
29.3 Digital Inputs
SPDIF - AES/EBU
•
1 x RCA, transformer-balanced, galvanically isolated, according to AES3-1992
•
High-sensitivity input stage (< 0.3 Vpp)
•
SPDIF compatible (IEC 60958)
•
Accepts Consumer and Professional format, copy protection will be ignored
•
Lock range: 28 kHz – 103 kHz
•
Jitter when synced to input signal: < 3 ns
ADAT Optical
•
1 x TOSLINK, format according to Alesis specification
•
Standard: 8 channels 24 bit, up to 48 kHz
•
Double Speed (S/MUX): 4 channels 24 bit 96 kHz
•
Bitclock PLL ensures perfect synchronisation even in varispeed operation
•
Lock range: 31.5 kHz – 55 kHz
•
Jitter when synced to input signal: < 3 ns
Word Clock
•
BNC, not terminated (10 kOhm)
•
Automatic Double Speed detection and internal conversion to Single Speed
•
Not affected by DC-offsets within the network
•
Signal Adaptation Circuit: signal refresh through auto-center and hysteresis
•
Overvoltage protection
•
Level range: 1.0 Vpp – 5.6 Vpp
•
Lock Range: 28 kHz – 105 kHz
•
Jitter when synced to input signal: < 3 ns
29.4 Digital Outputs
SPDIF - AES/EBU
•
1 x RCA, transformer-balanced, galvanically isolated, according to AES3-1992
•
Output level Professional 2.6 Vpp, Consumer 1.2 Vpp
•
Format Professional according to AES3-1992 Amendment 4
•
Format Consumer (SPDIF) according to IEC 60958
•
Single Wire mode, sample rate 28 kHz up to 103 kHz
ADAT
•
1 x TOSLINK
•
Standard: 8 channels 24 bit, up to 48 kHz
•
Double Speed (S/MUX): 4 channels 24 bit 96 kHz
Word Clock
•
BNC, max. output voltage: 5 Vpp
•
Output voltage @ 75 Ohm termination: 4.0 Vpp
•
Output impedance: 10 Ohm
•
Frequency range: 27 kHz – 200 kHz
29.5 MIDI
•
1 x MIDI I/O via 5-pin DIN jacks
•
Galvanically isolated by optocoupled input
•
Hi-speed mode: Jitter and response time typically below 1 ms
•
Separate 128 byte FIFOs for input and output