RME Audio DMC-842, User Manual

Page: 27 / 56

User’s Guide DMC-842
© RME
27
The button Send Data allows an offline configuration of the DMC-842 by a single one-time
transmission of all settings.
The button
Receive Data allows a one-time request of all settings of all DMC-842.
Via
File / Save complete setups with up to 8 DMC-842 can be saved and recalled anytime.
Via MIDI remote control, all front panel controls of the DMC-842 can be locked (
Lock Keys ). An
exception is the REMOTE key. In the Off-state the function Lock Keys is deactivated. Therefore
a locking of all the controls can be revoked directly at the unit at any time.
The eight identical channels consist of the following elements:
Level Meter
Lock, Sync, Limiter Active and Mode 2 display
Activation of DPP, SRC, Stereo (odd channels only) and M/S
The channel name can be edited
Gain setting
Setting the Directivity Pattern
Choice of Mute and Phase Inversion
Selection of the Pre-Attenuation (PAD), 0, -6, -12 or -18 dB
Choice of the Low Cut cut-off frequency, 0 Hz (Off), 40 Hz, 80 Hz and
160 Hz
Several options which are available only when using stereo
microphones: M/S, Mono, Edit (opens a dialog for the M/S and L/R
configuration)
Activation of Limiter and Compressor (microphone based features). Edit
opens a dialog to configure several parameters.
Choice of indication light at the microphone: 1 and 2. Edit opens a dialog
to set the brightness.
Mic Info: Opens a dialog presenting all the features reported by the
microphone as supported.
Reset sets all the settings back to a default state. Config allows for an offline configuration of
currently not active (greyed out) parameters.