RME Audio ADI-2 Pro, User Manual

Page: 20 / 114

20
User’s Guide ADI-2/4 Pro SE - v 1.0
9. RME Multi-Remote Control (MRC)
The included infrared remote control, manufactured exclusively for RME, offers an almost com-
plete remote control in a clear way. It is pre-set to control the
ADI-2 DAC . Pressing a button
therefore causes the SEL(ect) LED to light up green . To control the ADI-2/4 Pro SE code table 3
needs to be activated so that the SEL LED lights up in red color. If the LED shows green, orange
or blue color, another code table is active that is not compatible with the ADI-2/4 Pro SE.
To change the code table:

Keep SEL pressed until the LED lights up constantly.

Press button 3. The LED turns red and then off. The remote control now works with the ADI-
2/4 Pro SE.
Note:
SETUP
– Options – SPDIF/Remap Keys - Remap Keys
must be set to ON or Remote .
9.1 Keys and Functions
SEL. Choice between 4 different code tables. The ADI-2/4 Pro
SE uses table 3, recognizable by the LED color red.
Power On/Off. Press and hold the button for 1 second to switch
off.
B/T. Bass/Treble active or off (linear).
EQ. PEQ active or off (linear).
LD. Loudness active or off.
B+ / - . Increase or decrease Bass, same as encoder 1.
+ (VOL) - . Increase or decrease volume.
VOL. Corresponds to pressing the VOLUME button on the unit.
Short press switches between 1/2 and 3/4, long press results in
output change when configured via
SETUP - Options
– Phones –
Toggle Ph/Line .
T+ / - . Increase or decrease Treble, same as encoder 2.
L / R. Change balance between left and right.
1, 2, 3, 4, 5, 6, 7. Remap Function Keys. In the SETUP
– Options – SPDIF/Remap Keys
menu,
61 different commands/actions are available for these seven programmable keys (see chapter
14.1.1). Functions such as Polarity, Crossfeed and DAC filters can be controlled live from the
preferred listening position. The default settings are: 1 Source Analog, 2 Source AES, 3 AutoDark,
4 DIM, 5 Source SPDIF coaxial, 6 Source Optical, 7 Source USB. All Source keys require the
Basic Mode DAC to be active.
Mute. Mute the audio output.
Since the ADI-2/4 Pro SE has two independent stereo outputs, most keys only influence the cur-
rently selected or active output (see marker in the status bar).
The remote requires a standard lithium battery CR2025 (included). For first time usage please
tear out the transparent plastic isolation completely.