User’s Guide ADI-2 DAC
© RME
25
14. SETUP
The key Setup gives access to two top level screens:
Options
and
Load/Store all Settings
. Op-
tions has the subpages
Hardware/Diagnosis, Device Mode, Clock
.
14.1 Options
14.1.1 Hardware/Diagnosis
Subpage
Hardware/Diagnosis,
has the following entries:
Display Mode
Available settings are: Default, Dark. The dark scheme inverts the white background and black
numbers/text to black background and light-grey numbers/text in all menus.
Meter Color
Green, Cyan. Default: Green. Changes the color of the meter screens for PCM and DSD mode.
AutoDark Mode
OFF, 10s. Automatically turns off all LEDs and the display after 10 seconds of user inactivity. A
key press, turning an encoder and the remote control will temporarily activate LEDs and display
again. Using the remote the time for entering the dark mode is 3 seconds.
Remap Keys
OFF, ON, Remote. Default: Remote. Allows to assign 21 different functions/actions to the four
function keys on the unit and on the remote, or the remote only. Configuration is done via the
following four entries:
VOL (1), I/O (2), EQ (3), SETUP (4)
. Available functions/actions:
Setup 1 to 9, Mono, Mono to L, Mute, Loudness, EQ enable, B/T enable, EQ+B/T+Ld, Toggle
Ph/Line, Polarity, Dim, AutoDark, Toggle View.
The original function of the key, entering the menu, is still available by pushing the key at the
unit for half a second.
Notes on Remap Keys:
Factory default for remote buttons 1 to 4:
1: Mono, 2: Loudness, 3: AutoDark, 4: Dim
Dim
is a remote only function with a fixed volume attenuation of 20 dB. Dim is deactivated also
by changing the volume, even directly at the unit.
LCD Brightness
Adjustable from 20% to 100%. Default is 80%.
LCD Tint Control
Adjustable from -8 (yellow) to 8 (blue). Enables compen-
sation of the display's colour deviation as well as suiting the
user's taste.
Test Results
Please ignore. For internal use only.
SW Version
Shows the current version number and date of the internal DSP software.
Summary of Contents for ADI-2 DAC
