2
Intr
oduction, Heal
th & Saf
et
y, & P
ost I
nstal
lation
Introduction
This installation manual contains essential information for the effective and safe installation of RM
Solar products. It is essential that this kit is fitted by someone with relevant training or previous
experience in the field of Solar Thermal, if this kit is installed without prior training or qualification
your guaranteed may be void and your help limited.
This technical documentation should be available with you at all times during the installation, but
prior to installation please read these instructions as in many cases it will prevent problems from
occurring during the installation process.
Health & Safety Information
RM Solar panels are high quality thermal solar panels using selective coating technology to convert
light into heat. RM Solar panels should only be fitted by authorised, trained and qualified personnel.
They are not intended to be a “do it yourself” product. Panels are also sometimes called “solar
collectors”.
When fitting the panels installers shall comply with all relevant health and safety regulations and
shall carry out a suitable and sufficient risk assessment before any work commences.
Post Installation
After the correct and full installation and commissioning of the RM Solar system please make sure
you take the following steps:
In The Manual Please:
• Complete the product guarantee form included with the solar kit.
• Complete the product commissioning certificate.
Ensure that you:
• Explain how the system works and how to get the best from the system to the customer.
• Make sure these instructions are left with the customer.
• Service the system in accordance with recommended guidance, and complete the log as
appropriate.
Pre Installation
• Please ensure all equipment is on site, and no parts are damaged.
• Please make a note of any solar panel serial numbers.
