IMS01P04-E4
9
•
Terminal No. 11 is not used.
•
Use the solderless terminal appropriate to the screw
size (M3)
.
6.3 Pin Layout of Connector
Modular connector
Modular connector
6
1
.
.
.
.
.
.
.
.
.
.
.
.
COM. PORT1
COM. PORT2
COM. PORT3
Modular connector
COM. PORT1:
Connector for PLC or Host computer connection
Based on RS-422A/RS-232C (Specify when ordering)
Modular connector
COM. PORT2:
Connector for PLC or Host computer connection
Based on RS-422A
Modular connector
COM. PORT3:
Connector for SRV unit extension
Based on RS-422A
RS-422A
Pin No.
Signal name
Symbol
1
Receive data
R (A)
2
Receive data
R (B)
3 Signal
ground SG
4
Send data
T (B)
5
Send data
T (A)
6 Signal
ground SG
RS-232C
Pin No.
Signal name
Symbol
1 Unused
－
2
Send data
SD (TXD)
3 Signal
ground SG
4
Receive data
RD (RXD)
5 Unused
－
6 Signal
ground SG
Customer is requested to prepare a communication
cable fit for the V-TIO-E/F module to be connected by
the host computer or PLC.
Connection cable W-BF-01*, W-BF-02* and W-BF-28
(RKC product) can use to connect the host computer or
PLC.
* Shields of the cable are connected to SG (No. 6 pin) of
the X-TIO-E/F connector.
The six-pin type modular connector should be used for
the connection to the V-TIO-E/F module.
Recommended manufacturer and model:
Hirose Electric, TM4P-66P
Event input/output connector
1
6
Event input/output
connector (socket)
Circuit configuration
24 V DC
1
2
3
DI
4
5
6
Load
DO1
DO2
Load
Attention in Connector (plug) Wiring
•
Use the following connector (plug) as that connected to the
event input/output connector.
Connector (plug) is sold separately.
SRVP-01 (Front-screw type)
SRVP-02 (Side-screw type)
•
The lead wires use the stranded wire.
•
Use the stranded wire from size 0.2 to 2.5 mm
2
(AWG 24-12).
•
Stripping length is as follows.
SRVP-01: 10 mm
SRVP-02: 7 mm
•
Recommended tightening torque of the lead wire in the
connector (plug): 0.5 to 0.6 N
⋅
m (5 to 6 kgf
⋅
cm)
Screw size: SRVP-01: M2.5
SRVP-01:
M3
[SRVP-01] Front-screw type
[SRVP-02] Side-screw type
Stripping length
10 mm
Stranded wire size:
0.2
to
2.5
mm
2
(AWG
24-12)
Recommended tightening
torque: 0.5 to 0.6 N
⋅
m
(5 to 6 kgf
⋅
cm)
Stripping length
7 mm
Stranded wire size:
0.2 to 2.5 mm
2
(AWG
24-12)
Recommended tightening
torque: 0.5 to 0.6 N
⋅
m
(5 to 6 kgf
⋅
cm)
5.9 mm or less
3.2 mm or more
Recommended tightening
torque:
0.4 N
⋅
m (4 kgf
⋅
cm)
Pin
No.
Description
1
Digital input (DI) (
−
)
2
Digital input (DI) (
+
)
3
4
Digital output (DO) 1
(Relay contact output)
5
6
Digital output (DO) 2
(Relay contact output)
