6. REMOTE INPUT/OUTPUT AND REMOTE REGISTERS
IMSRM52-E4
43
6.3 Remote Registers
Remote registers (RWr and RWw) are numerical data.
“
n
” and “
m
” in the table are the addresses assigned to the master station by the station No.
setting. They can be calculated by the following equations:
n = (Station No.
−
1)
×
4
m = (Station No.
−
1)
×
4
As the calculation results are expressed in decimal digits, they are converted to hexadecimal
digits before substituted for “
n
” and “
m
” in the table.
Example: If the station No. of the H-LNK-A module is “1” or “5”
For station No. 1: Remote register RWrn to RWrn+F
→
RWr0 to RWrF
RWwm to RWwm+F
→
RWw0 to RWwF
For station No. 5: Remote register RWrn to RWrn+F
→
RWr10 to RWr1F
RWwm to RWwm+F
→
RWw10 to RWw1F
List of remote register
(4 stations occupied, Temperature control 16 channels)
Direction: Remote device station (Temperature control unit)
→
Master station (PLC)
[RWr]
Address Details
RWrn
CH1
RWrn+1
CH2
RWrn+2
CH3
RWrn+3
CH4
RWrn+4
CH5
RWrn+5
CH6
RWrn+6
CH7
Data specified by the Extension No. setting for display [RYn0 to RYn5] *
RWrn+7
CH8
For details of the Extension No. and data, see
6.4 Extension No. (P. 45)
.
RWrn+8
CH9
RWrn+9
CH10
RWrn+A
CH11
RWrn+B
CH12
RWrn+C
CH13
RWrn+D
CH14
RWrn+E
CH15
RWrn+F
CH16
* For details, see page 44.
