Personnel:
n
Assembly staff
Protective equipment:
n
Protective clothing
n
Safety goggles
n
Protective gloves
n
Safety shoes
Prerequisite:
n
The electric gear unit and/or motor (if available) are secured
against restarting.
1.
Clean the lubrication points (Fig. 40/1) on both sides of the
2.
Ensure that the oil press is axially aligned to
the lubrication nipple’s direction of flow.
Place the oil press on the lubrication nipples (Fig. 40/1) on
both sides of the guide carriage (Fig. 40/2) one after the
other and lubricate the guide carriage.
3.
Move the guide carriage (Fig. 40/2) several times to distribute
the lubricant evenly.
ð
The guide shafts are lubricated.
Lubricating the guide shaft
Cleaning the lubrication point
Fig. 40: Lubricating the guide shaft
Lubricating the guide shaft
Maintenance and troubleshooting
Lubricating the guide shaft
14.10.2021
Linear unit RK MonoLine R/RK MonoLine Z
113