Check for parts online at
www.HuntRiversEdge.com
or call 800-450-EDGE (3343) M-F 8-5
7
Operator's Manual
CLASSIC XT 1-Man Ladder Stand
FIGURE
5
FIGURE
5
15
2
16
19
18
14
6
5. Take the foot platform (1) and align holes in the outer edges with
holes in free end of support bars (6), and flared platform rails (2) as
shown in FIGURE 5. Secure the support bars (6) to the rear of the
foot platform (1) with two 1/4-20 X 1-1/2 IN bolts (18), two washers
(14), and two 1/4-20 nuts (15).
6. Two 1/4-20 X 2-1/4 IN bolts (19), two yellow washers (16), and two
1/4-20 nuts (15) will be used on the front of the foot platform (1)
to secure it to the flared platform rails (2). SEE FIGURE 5.
ground
7. Sections are assembled on the ground in the following order:
bottom ladder section (10), middle ladder section (12), top ladder
section (9) and the top section (assembled top platform section).
Connect all parts together using six lockpins (17). SEE FIGURE 5.
10
17
12
9
1
